UNIWO-HV series solenoid valve - Introduction: electromagnetic solenoid valve is used to control industrial equipment, is used to control the principles of fluid automation infrastructure elements: power, the electromagnetic force open the pilot hole, the rapid decline in the chamber pressure, around the closure member is formed on the lower high pressure, fluid pressure to promote off pieces to move up, the valve opens; when energized, the spring force of the pilot hole closed, the inlet pressure chamber through the bypass hole quickly shut the valve member is formed around the lower low on high pressure, fluid pressure to promote off pieces moving down, close the valve. UNIWO-HV series solenoid valve - Product Features: Lead-free high-precision German technology standards body outlet sealing material may not work long-life oil (millions of times over Optional: pipe connection type, NAMUR Optional: Explosion, ordinary type 24V220V (50Hz or 60Hz) Temperature -20 ~ 80 ℃ Optional: -40 ~ 110 ℃ within breathing and prolong life UNIWO-HV series solenoid valve ~ product parameters: 1. Installation can be arbitrarily chosen direction in the horizontal position, can also be installed vertically, but also choose the location of vibration. 2. Before taking over ① installation, use compressed air to clean the tube flush out any impurities. takeover ② between cylinder and electric control valve should be short, so that saves compression air, but also speed up the cylinder movement time ③ steel pipe, be sure to choose the surface of galvanized pipe 3. Environment This series valves to avoid in the following environments:. ① environmentally corrosive gases, chemicals and solutions; ② higher than 80 ℃ or by infrared irradiation environment.